How to Clean Jura E6

Keeping your Jura E6 clean is essential for maintaining its performance and ensuring the quality of your coffee. Regular cleaning not only extends the machine’s lifespan but also prevents the buildup of coffee oils and mineral residue that can affect flavor and functionality.

This guide on how to clean jura e6 will walk you through the steps to properly clean your Jura E6, ensuring it continues to deliver exceptional coffee every time.

What is Required

Jura Cleaning Tablets:

The Jura E6 comes with a cleaning tablet included in the package, and it is recommended to use this specific brand of tablets for optimal results. These tablets are designed to dissolve and remove any coffee oils or residue from the brewing unit, ensuring proper functionality and taste.

Water Filter:

It is also essential to regularly replace the water filter in your Jura E6. The water filter removes impurities from the water, which can affect the taste of your coffee. It is recommended that the water filter be replaced every 2-3 months or after making 50 liters of coffee.

Cleaning Supplies:

To properly clean your Jura E6, you will need some additional supplies such as a cleaning tablet, descaling agent, and a milk system cleaner. These supplies can be purchased directly from Jura or from other retailers. It is important to use the recommended products to ensure the longevity of your machine.

7 Simple Steps on How to Clean Jura E6

Step 1: Prepare Your Machine

Start by turning off your Jura E6 and allowing it to cool down if it was recently used. Make sure the machine is unplugged from the power source to ensure safety while cleaning. Remove any leftover coffee grounds or water from the drip tray and water reservoir.

Place a container under the coffee spouts to catch any residue during the cleaning process. This initial preparation ensures your machine is ready for a thorough and effective cleaning.

Step 2: Cleaning the Brew Unit 

To clean the brew unit of your Jura E6, open the side panel of the machine to access the brew group. Carefully remove the brew unit by following the instructions in your user manual. Rinse the brew unit thoroughly under lukewarm running water to remove any coffee residues and oils.

Avoid using soap or abrasive cleaning agents, as they may damage the unit. Allow the brew unit to air dry completely before reinserting it into the machine. This step is crucial for maintaining the performance and longevity of your Jura E6.

Step 3: Clean and Descale the Water Tank

Regularly cleaning and descaling the water tank is essential for ensuring that your Jura E6 produces high-quality coffee. Over time, minerals from water can build up in the tank, affecting the taste and quality of your coffee.

To clean the water tank, remove it from the machine and empty any remaining water. Wash the tank with warm, soapy water and rinse thoroughly. Make sure to also clean any removable parts of the tank, such as filters or lids.

Step 4: Descaling the Water Tank

Descaling is the process of removing mineral deposits from the water tank and other internal components of your Jura E6. This should be done every 2-3 months, depending on your water hardness level.

To descale your Jura E6, you will need a descaling solution specifically designed for coffee machines. Follow the instructions on the package for mixing the solution with water and filling the water tank. Then, run a descaling cycle according to your machine’s instructions.

Step 5: Cleaning the Milk System

If your Jura E6 has a milk frother, it is important to clean and maintain it regularly as well. This will ensure that your milk drinks are always of the highest quality.

To clean the milk system, you can use a special cleaning solution or simply run hot water through the system. If using a cleaning solution, make sure to follow the instructions on the package for mixing and usage.

Step 6: Wiping Down External Surfaces

After completing all of the internal maintenance tasks, don’t forget to wipe down the external surfaces of your Jura E6. Use a damp cloth to remove any residue or spills from coffee grounds or other substances.

Step  7: Reassembling the Jura E6

Once you have completed all of the cleaning and maintenance tasks, it’s time to reassemble your Jura E6. Be sure to follow the proper steps in reverse order, starting with replacing any removable parts or components that were taken out during the cleaning process.

Following these steps on how to clean jura e6, reattach the water tank and fill it with fresh, cold water. Place a container under the coffee spout and then turn on the machine to run a cleaning cycle. This will flush out any remaining residue or cleaning solution from the internal components of your Jura E6.

Regular Maintenance

To keep your Jura E6 functioning at its best, regular maintenance is essential. Begin by descaling the machine periodically to remove any mineral buildup, especially if you live in an area with hard water. Use the recommended descaling tablets to ensure compatibility with the machine. Additionally, replace the water filter as needed to ensure optimal water quality and prevent impurities from affecting the taste of your coffee.

Clean the drip tray, coffee grounds container, and milk system daily to avoid the buildup of residue and ensure hygiene. By following these maintenance practices, your Jura E6 will continue to deliver high-quality coffee for years to come.

Troubleshooting

If you encounter issues with your Jura E6, here are some common problems and their solutions:

Machine Not Turning On

Ensure the machine is securely plugged into a power outlet.

Check if the outlet is functional by testing another device.

If the machine still doesn’t power on, inspect the power cord for any damage and contact customer support if necessary.

Coffee is Weak or Watery

Verify that the coffee strength settings are adjusted to your preference.

Check if the coffee beans are fresh and of good quality.

Clean the brewing unit, as blockages can impact extraction.

No Milk Froth or Poor Frothing

Ensure the milk system components are clean and free from residue.

Check that the milk used is cold and has the proper fat content for frothing.

Inspect the milk tube for blockages or kinks, and replace it if necessary.

Error Messages on Display

Refer to the user manual for specific error code resolutions.

Perform any recommended cleaning or maintenance tasks, such as descaling or filter replacement.

Restart the machine to reset the system.

Water is Not Dispensing

Confirm that the water tank is correctly positioned and filled with water.

Check the water filter for clogs or replace it if needed.

Run a descaling program to remove potential mineral buildup.

If problems persist after following these steps, consult the Jura E6 user manual or reach out to Jura’s customer support team for further assistance.

Frequently Asked Questions

Q1: How Often Do I Need to Descale My Jura E6 Machine?

A: It is recommended to descale your machine every 2-3 months or after making approximately 200 cups of coffee. The frequency may vary depending on the water hardness in your area. You can check the water hardness levels using a test strip or contact your local water supplier for information.

Q2: What Type of Water Should I Use with My Jura E6 Machine?

A: For best results, use cold, filtered water in your Jura E6 machine. Avoid using distilled or softened water as it may affect the taste and quality of your coffee. If your water is particularly hard, you may need to use a water softening filter or descaling agent to prevent mineral buildup in your machine. It is important to regularly clean and descale your machine as outlined in the user manual to ensure optimal performance and longevity.

Q3: How Do I Know When to Replace the Water Filter?

A: The Clear Smart filter included with your machine has a built-in indicator that will notify you when it needs to be replaced. It is recommended that the filter be replaced every 2 months or after approximately 50 liters of water have been used, whichever comes first.

Q4: How Often Should I Clean My Jura E6 Machine?

A: It is recommended to clean your machine once a week for optimal performance and hygiene. However, the frequency may vary depending on usage and water hardness in your area. Regular cleaning will ensure that your machine stays in top condition and produces high-quality coffee.

Conclusion

Maintaining your Jura E6 machine properly is essential to ensure it continues to deliver exceptional coffee quality and performance. By following the recommended cleaning schedule, replacing filters as needed, and considering factors like water hardness, you can extend the lifespan of your machine and enjoy delicious coffee every day.

Regular care not only preserves the machine’s functionality but also enhances your overall coffee experience. Thanks for reading this article on how to clean jura e6.