Written By :

Connor

/

/

Dishwasher

Expert Author

How to Secure a Dishwasher on the Side

After installing a new dishwasher, the final step is to anchor it securely in place. This prevents the appliance from tipping forward when you open ...

After installing a new dishwasher, the final step is to anchor it securely in place. This prevents the appliance from tipping forward when you open the door or load the racks, which is a crucial safety measure. The standard method is to attach mounting brackets to the underside of the countertop. However, with granite, quartz,

or marble countertops, drilling is not an option. In these situations, the solution is to anchor the appliance to the adjacent cabinetry. This guide provides clear, beginner-friendly instructions on how to secure a dishwasher on the side, ensuring a safe, stable, and professional-looking installation.

How to Secure a Dishwasher on the Side

Begin by turning off the power supply to the dishwasher to ensure safety during the installation process. Then, pull the dishwasher slightly out of its enclosure to access the mounting brackets. Align the brackets with the pre-drilled holes on the side of the cabinetry,

ensuring proper positioning for a snug fit. Use screws to secure the brackets firmly to the cabinet walls, but take care not to overtighten to avoid damaging the material.

Once secured, gently slide the dishwasher back into place, ensuring it is level and properly aligned with the surrounding cabinetry. Finally, reconnect the water supply and electrical connections before testing the dishwasher for functionality.

Additional Tips for Installing Dishwashers

  • Measure Twice, Install Once: Before beginning the installation process, be sure to measure all dimensions of your space accurately. This will prevent any potential issues with fit or alignment later on.
  • Consult the Manual: Always refer to the manufacturer’s instructions when installing a dishwasher. Each model may have specific requirements or differences in installation methods.
  • Secure All Connections: It is important to ensure that all connections for water and electricity are properly secured during installation. Loose connections can cause leaks or malfunctions.
  • Leveling is Key: An unevenly installed dishwasher can lead to poor performance and damage to the appliance. Use a carpenter’s level to make sure that the dishwasher is perfectly level before securing it in place.
  • Test Run: Before fully installing your dishwasher, run a test cycle to ensure that all components are functioning properly. This can help catch any potential issues with fit or alignment later on.
  • Use High-Quality Materials: When connecting water lines and electrical wiring, use high-quality materials that are approved for use with dishwashers. This will ensure the safety and longevity of your appliance.
Run a test cycle to ensure that all components

7 Step-by-Step Guide on How to Secure a Dishwasher on the Side

Step 1: Check the Dishwasher for Side-Mounting Options

Before you begin, you need to confirm that your dishwasher supports side-mounting. Open the dishwasher door and look along the sides of the tub frame, near the front. You should see small, circular plastic caps or plugs. These caps cover the pre-drilled holes that are specifically designed for side-mount installation.

Most modern dishwashers include this option precisely for situations with stone countertops. If you can’t find these holes, consult your owner’s manual. The manual will have a diagram showing all possible mounting locations, confirming whether your model is compatible with this method.

Step 2: Position and Level the Unit

Proper positioning is crucial for a successful installation. Carefully slide the dishwasher into the cabinet opening, making sure it is centered. The front face of the dishwasher door should be flush with the front of your surrounding cabinets for a seamless, integrated look.

 Carefully slide the dishwasher into the cabinet opening

Next, use a level to ensure the appliance is perfectly level from front-to-back and side-to-side. Place the level on the top rack guide rails for an accurate reading. Use an adjustable wrench to turn the dishwasher’s feet, raising or lowering each corner until the unit is perfectly balanced and stable.

Step 3: Remove the Side-Mount Hole Plugs

Once the dishwasher is perfectly positioned and leveled, you can prepare the side-mounting holes. Using a small flathead screwdriver or a putty knife, gently pry off the plastic caps that cover the pre-drilled holes on the sides of the dishwasher’s tub frame. Be careful not to scratch the finish of the dishwasher tub as you remove them. These caps are purely cosmetic and can be discarded. Removing them reveals the guide holes through which you will drive the screws to anchor the unit to the cabinets on either side.

Step 4: Mark and Drill Pilot Holes in the Cabinets

With the dishwasher’s mounting holes exposed, you can now mark the cabinet walls. Open the dishwasher door fully to get a clear line of sight. Using a pencil, mark the center of the mounting hole on the inside wall of the cabinet stiles (the vertical wood frames of your cabinets).

Mark the Center of the Mounting Hole 
on the Inside Wall of the Cabinet

After marking both sides, it’s best to carefully slide the dishwasher back out of the opening just a few inches. Using a drill bit that is slightly smaller in diameter than your mounting screws, drill a pilot hole at each mark. This prevents the wood from splitting when you drive the screws.

Step 5: Carefully Slide the Dishwasher

Now it is time to perform the main task. Carefully slide the dishwasher back into its final, leveled position. Ensure the side-mounting holes on the dishwasher frame align perfectly with the pilot holes you just drilled into the cabinets. The screws for this are often included with the dishwasher or a side-mount installation kit. They are typically short, #8 wood screws, about 1/2 to 5/8 inches long. It’s crucial to use short screws to avoid accidentally driving them through the other side of your cabinet frame.

Step 6: Drive the Mounting Screws

With everything aligned, you can now secure the appliance. Insert one of the short wood screws through the mounting hole on the dishwasher frame and into the corresponding pilot hole in the cabinet. Using a drill with a Phillips head bit or a screwdriver, drive the screw until it is snug. Do not overtighten, as this could strip the wood or damage the dishwasher’s plastic frame. Repeat the process on the other side. Your dishwasher should now feel solid and unmovable, firmly anchored to the cabinetry.

Step 7: Test the Dishwasher’s Stability

The final step is to test your work. With the mounting screws in place, open and close the dishwasher door several times. It should not rock, shift, or tilt forward. Gently pull out the top and bottom racks to their full extension. The unit should remain completely stable. This simple test confirms that you have successfully secured the dishwasher, ensuring it is safe for daily use. If there is any movement, re-check that the unit is level and that the mounting screws are snug.

Open and Close the Dishwasher 
Door Several Times

Frequently Asked Questions (FAQs)

Why Do I Need to Secure My Dishwasher?

Securing a dishwasher is a critical safety step. An unanchored dishwasher can tip forward when the door is opened, especially when the racks are loaded with heavy dishes. This poses a significant injury risk, particularly to children who might hang on the door. It also puts stress on the water and drain line connections at the back, which could lead to damaging leaks.

Can I Secure a Dishwasher if I Have Granite Countertops?

Yes. In fact, securing the dishwasher to the side cabinets is the standard and recommended method for kitchens with granite, quartz, marble, or any other stone countertop. Drilling into these materials is not advisable as it can cause them to crack. All modern dishwashers and installation kits are designed with this side-mounting option in mind.

What Kind of Screws Should I Use for Side-Mounting?

You should use short wood screws, typically around 1/2-inch to 5/8-inch long. The specific screw size is often a #8 screw. Many dishwashers include the correct screws for this purpose. It is crucial to use short screws to ensure they anchor firmly into the cabinet stile (the vertical frame) without poking through the other side.

What if My Dishwasher Doesn’t Have Side-Mounting Holes?

While most modern dishwashers have this feature, some older or basic models might not. If this is the case, you can purchase a dishwasher side-mount installation kit. These kits consist of metal brackets that attach to the dishwasher frame and provide a flange that you can then screw into the side cabinets, creating a secure anchor point.

My Dishwasher Is Still Wobbly After Securing It. What’s Wrong?

If the dishwasher still moves after you’ve installed the side screws, the most likely cause is that the unit is not properly leveled. An unlevel dishwasher can rock back and forth.

  • First, re-check that all four feet are making firm contact with the floor.
  • Use a level on the rack rails and adjust the feet until it is perfectly level.
  • Finally, ensure the mounting screws are snug (but not overtightened).

Conclusion

Anchoring your dishwasher is a non-negotiable final step for a safe and professional installation. When stone countertops prevent you from mounting to the top, the side-mounting method is the perfect solution.

By using the pre-drilled holes in the dishwasher’s frame, leveling the unit correctly, and driving short screws into the adjacent cabinets, you can create a rock-solid installation. With this guide, you now have all the information you need on how to secure a dishwasher on the side, ensuring your appliance is safe, stable, and ready for years of reliable use.