Written By :

Connor

/

/

Dishwasher

Expert Author

How to Clean Filter on Frigidaire Dishwasher

A dishwasher is a cornerstone of a modern, efficient kitchen. It saves time and effort, but like any hardworking appliance, it needs regular maintenance to ...

A dishwasher is a cornerstone of a modern, efficient kitchen. It saves time and effort, but like any hardworking appliance, it needs regular maintenance to perform at its best.

One of the most crucial yet often overlooked tasks is cleaning the dishwasher filter. Your Frigidaire dishwasher has a filtration system designed to catch food particles and debris, preventing them from redepositing onto your clean dishes. When this filter gets clogged, it can lead to a host of problems.

This guide on how to clean filter on frigidaire dishwasher will walk you through everything you need to know to keep your dishwasher’s filter clean, ensuring your dishes come out sparkling every time.

How to Clean Filter on Frigidaire Dishwasher

What are the Benefits?

Taking a few minutes to clean your dishwasher filter regularly offers significant rewards. It’s a simple task that pays off in both performance and longevity for your appliance.

  • Improved Cleaning Efficiency: A clean filter allows water to circulate freely. When the filter is clogged with food and grime, it obstructs water flow, leaving your dishes with leftover food particles, a greasy film, or a gritty residue. A clean filter ensures maximum water pressure and cleaning power.
  • Longer Appliance Lifespan: When the pump has to work harder to push water through a clogged filter, it puts unnecessary strain on the motor. Over time, this can lead to premature wear and tear and costly repairs. Regular cleaning reduces this strain, helping your Frigidaire dishwasher last longer.
  • Prevention of Unpleasant Odors: Old food particles trapped in the filter begin to decompose, creating a breeding ground for bacteria and mold. This results in foul odors that can permeate your kitchen and even transfer to your dishes. Cleaning the filter eliminates the source of these smells, keeping your appliance and kitchen fresh.

What Will You Need?

The good news is that you don’t need any specialized tools for this job. You likely have everything you need right in your kitchen.

  • A soft brush (an old toothbrush works perfectly)
  • Dish soap
  • A sink or bucket
  • A cloth or sponge
  • A towel

10 Easy Steps on How to Clean Filter on Frigidaire Dishwasher

Cleaning the filter on your Frigidaire dishwasher is a straightforward process. Just follow these detailed steps to get the job done right.

Step 1: Empty the Dishwasher

Before you can access the filter, you need a clear workspace. Make sure your dishwasher is empty of all dishes, cutlery, and racks. This gives you unobstructed access to the bottom of the dishwasher tub where the filtration system is located. Removing the bottom rack is essential. Simply pull it all the way out and lift it off its tracks. This will expose the lower spray arm and the filter assembly underneath it. Set the rack aside on a towel to keep your floor dry.

Make Sure Your Dishwasher is Empty

Step 2: Locate the Filter Assembly

With the bottom rack removed, look at the floor of the dishwasher tub. You will see the lower spray arm in the center. The filter assembly is located directly beneath this arm. On most Frigidaire models, it consists of two parts: a cylindrical filter cup (often called the coarse filter) and a flat mesh screen (the fine filter) that sits within. The filter cup usually has a handle or locking mechanism on top, making it easy to identify. It’s designed to be user-accessible, so it should be easy to spot.

Step 3: Remove the Lower Spray Arm

To get to the filter, you will likely need to remove the lower spray arm first. This arm is what sprays water upwards to clean the dishes on the top rack. It’s typically held in place by a plastic nut or simply snaps onto a central pivot. To remove it, gently turn the locking nut counter-clockwise or carefully pull the arm straight up until it detaches from its mounting point. Place the spray arm aside with the dishwasher rack. This step gives you clear and easy access to the entire filter assembly without any obstructions.

You Will Likely Need to Remove Lower Spray Arm

Step 4: Unlock and Remove the Filter Cup

Now, focus on the cylindrical filter cup. Most Frigidaire models have a locking mechanism that secures it in place. This is often indicated by arrows or lock/unlock symbols. To remove it, you’ll typically need to turn the handle or the top of the cup about a quarter-turn counter-clockwise. You should feel it release. Once unlocked, you can lift the filter cup straight up and out of the dishwasher. Be prepared; it will likely be covered in food debris and feel a bit slimy.

Step 5: Remove the Fine Filter Screen

With the filter cup removed, you can now access the flat, fine filter screen that was underneath it. This large, circular mesh screen covers the sump area at the bottom of the dishwasher. In most cases, this screen is not locked in place and can be lifted out directly. Gently pry it up from the edges and lift it out of the dishwasher tub. This screen is designed to catch smaller particles that get past the coarse filter, so it may also have a layer of grime or small food bits on it.

Fine Filter Screen 
That Was Underneath

Step 6: Initial Rinse

Take both filter components—the cup and the screen—to your sink. Hold them under a steady stream of warm running water. This initial rinse will wash away most of the loose food particles and debris. You might be surprised at what you find, from stray pasta and vegetable peels to seeds and coffee grounds. Rinsing them first makes the scrubbing process much easier and less messy. Make sure to turn the filter cup and screen over to rinse all sides thoroughly.

Step 7: Scrub with Soap and Brush

After the initial rinse, it’s time for a deep clean. Apply a few drops of dish soap to your soft brush. Gently scrub both the inside and outside of the cylindrical filter cup. Pay close attention to the mesh areas, as this is where fine particles and greasy buildup tend to accumulate. Do the same for the flat filter screen, scrubbing both the top and bottom surfaces until all visible grime is gone. The soft bristles of a toothbrush are perfect for getting into the fine mesh without causing any damage. Avoid using abrasive sponges or steel wool, as they can tear the delicate filter mesh.

Step 8: Inspect and Clean the Filter Housing

While the filters are air-drying, turn your attention back to the dishwasher. Look into the opening where the filter assembly was located. This area, known as the filter housing or sump, can also collect debris. Use a damp cloth or sponge to wipe out any leftover food particles or grime from this area. Clean housing ensures that your freshly cleaned filters are going back into a clean environment, preventing immediate re-contamination.

Step 9: Reinstall the Fine Filter and Spray Arm

Once everything is clean, it’s time to put it all back together. Start with the flat, fine filter screen. Place it back into the bottom of the dishwasher, ensuring it sits flat and flush against the tub floor. There are usually guides or indentations to help you position it correctly. Next, reinstall the lower spray arm. Place it back onto its pivot and secure it by turning the locking nut clockwise or simply pushing it down until it snaps firmly into place. Give it a gentle spin to ensure it moves freely without hitting anything.

Step 10: Reinstall the Filter Cup and Bottom Rack

Finally, take the clean, cylindrical filter cup and insert it back into the opening over the fine filter screen. Push it down gently until it is fully seated. Then, turn it clockwise about a quarter-turn to lock it into place. You should feel it click or settle securely. Most models have arrows that will align when they’re properly locked. Once the filter is secure, slide the bottom rack back into the dishwasher. Your job is now complete, and your dishwasher is ready for its next cycle.

5 Things You Should Avoid

To ensure you don’t damage your dishwasher or its filter, keep these common mistakes in mind:

  1. Using Abrasive Cleaners or Tools: Never use steel wool, scouring pads, or harsh chemical cleaners on your filter. These can easily tear the delicate mesh, rendering the filter ineffective.
  2. Forgetting to Lock the Filter: Always make sure the filter cup is securely locked back into place. An unlocked filter can become dislodged during a cycle, potentially damaging the spray arms or other components.
  3. Running the Dishwasher Without the Filter: Never operate your dishwasher without the filter assembly. Doing so allows food debris to enter the pump and spray arms, which can cause clogs and serious mechanical damage.
  4. Scraping Dishes Too Vigorously: While you should scrape large food chunks off your plates before loading, don’t pre-rinse them completely. Dishwasher detergent is designed to cling to food particles to work effectively.
  5. Ignoring It for Too Long: Don’t wait until you smell something foul or your dishes come out dirty. Make cleaning the filter a part of your monthly kitchen cleaning routine to prevent problems before they start.

Conclusion

Cleaning your Frigidaire dishwasher filter is a simple, quick task that has a major impact on your appliance’s performance and longevity.

By investing just a few minutes each month, you can ensure your dishes are always sparkling clean, prevent unpleasant odors, and protect your dishwasher from unnecessary wear and tear.

By following the steps outlined in this guide on how to clean filter on frigidaire dishwasher, you can easily maintain this vital component and keep your kitchen running smoothly.