Written By :

Connor

/

/

Dishwasher

Expert Author

How to Use Kitchenaid Dishwasher

A KitchenAid dishwasher is a powerful addition to any modern kitchen, designed to make your life easier and your dishes sparkle. But to get the ...

A KitchenAid dishwasher is a powerful addition to any modern kitchen, designed to make your life easier and your dishes sparkle.

But to get the best results, you need to know how to use it correctly. Proper operation not only ensures cleaner dishes but also extends the life of your appliance and helps you save on water and energy.

This guide on how to use kitchenaid dishwasher will walk you through everything you need to know, from loading the racks to selecting the right cycle, transforming your dishwashing routine from a chore into a simple, efficient process.

How to Use Kitchenaid Dishwasher

What Will You Need?

To get started, you’ll need a few essential items.

  • High-Quality Dishwasher Detergent: This can be in powder, gel, or pod form. Choose a reputable brand for the best results.
  • Rinse Aid: This is crucial for preventing water spots and ensuring your glassware comes out crystal clear. It helps water sheet off dishes during the final rinse.
  • Dishwasher Salt (if applicable): If you live in an area with hard water, you may need dishwasher salt to help soften the water and prevent limescale buildup.
  • Proper Loading Technique: Knowing how to arrange your dishes is just as important as the cleaning agents you use.

10 Easy Steps on How to Use Kitchenaid Dishwasher

Follow these steps to master your KitchenAid dishwasher and achieve perfect cleaning results every time.

Step 1: Scrape, Don’t Rinse

Before you even think about loading, prepare your dishes. Scrape off large food particles into the trash or compost bin. You might be tempted to pre-rinse everything, but modern dishwashers are designed to handle a certain amount of food soil. In fact, the enzymes in many detergents work by latching onto food particles, so a completely clean plate might not get washed as effectively. A good scrape is all that’s needed. For heavily baked-on or burnt food, a quick soak or scrub might be necessary, but for everyday messes, just remove the big stuff. This saves you time, water, and effort at the sink.

Scrape Off Large 
Food Particles

Step 2: Load the Bottom Rack Correctly

The bottom rack is designed for your largest and most soiled items. This is where you should place dinner plates, pots, pans, and large bowls. The high-pressure spray arm located beneath this rack delivers the most powerful cleaning action. Place plates between the tines, facing the center of the dishwasher, to ensure they get full exposure to the water jets. Pots and pans should be placed on the sides or in the back, angled downwards to prevent them from collecting water. Avoid nesting items together, as this will block water flow and lead to poor cleaning. Ensure nothing is blocking the spray arm from spinning freely.

Step 3: Load the Top Rack Strategically

The top rack is intended for smaller, more delicate items. This is the ideal spot for glasses, mugs, small bowls, and plastics marked “dishwasher safe.” Place glasses and mugs upside down between the tines to prevent them from filling with water. Small bowls can also be placed here, angled for better cleaning. Many KitchenAid models have adjustable top racks, allowing you to create more space for taller items like wine glasses or larger items in the bottom rack. Utilize any foldable tines or stemware holders to secure delicate items and maximize space.

The Top Rack is 
Intended for Smaller

Step 4: Utilize the Third Rack (If Available)

Many newer KitchenAid dishwashers feature a third-level rack at the very top. This shallow tray is a game-changer for flatware and cooking utensils. Lay your forks, knives, and spoons flat in the designated slots. This prevents them from nesting together (a common issue in traditional baskets) and ensures each piece gets thoroughly washed and rinsed. This rack is also perfect for long, flat items like spatulas, ladles, and whisks that might otherwise block the spray arms if placed in the other racks. Using the third rack also frees up valuable space on the bottom rack.

Step 5: Place Silverware Properly

If your dishwasher has a traditional silverware basket, how you load it matters. For best results, mix up your forks, spoons, and knives in different compartments to prevent them from spooning or nesting. Place spoons and forks with the handles down and the heads up for better cleaning. For safety, knives should always be placed with the blade down and the handle up. If you have a third rack, this step is simplified, as you will lay each piece flat as described in the previous step, which is the superior method for cleaning silverware.

Knives in Different 
Compartments to Prevent

Step 6: Add the Detergent

Once your dishwasher is loaded, it’s time to add detergent. Locate the dispenser, which is usually on the inside of the dishwasher door. Most dispensers have a covered main wash compartment and sometimes an open pre-wash cup. Fill the main wash compartment with your chosen detergent—whether it’s powder, gel, or a pod. If using a pod, simply place it in the main wash compartment and close the lid. Avoid overfilling, as using too much detergent can leave a residue on your dishes. Follow the detergent manufacturer’s instructions for the correct dosage.

Step 7: Fill the Rinse Aid Dispenser

Next to the detergent dispenser, you will find the rinse aid dispenser. This is a small, usually circular compartment with a cap. Twist the cap to open it and pour in the rinse aid until it reaches the full indicator line. Be careful not to overfill it. A single fill of the rinse aid dispenser should last for several weeks or even months, depending on your usage. Your KitchenAid dishwasher will automatically release the correct amount during the final rinse cycle to help your dishes dry faster and prevent spotting.

You Will Find the 
Rinse Aid Dispenser

Step 8: Select the Right Wash Cycle

KitchenAid dishwashers offer a range of wash cycles tailored to different needs. The “Normal” cycle is suitable for everyday loads with typical food soil. For heavily soiled pots and pans, use the “Tough” or “Pots & Pans” cycle, which uses higher temperatures and a longer wash time. The “Light” or “China” cycle is for delicate items that require a gentler touch. For a quick turnaround, the “Express Wash” cycle cleans lightly soiled loads in under an hour. Consult your user manual to understand all the cycles your specific model offers.

Step 9: Choose Your Options

In addition to a primary cycle, you can select extra options to customize the wash. The “Hi-Temp Wash” option increases the main wash temperature to tackle tough, baked-on food. The “Sani-Rinse” option uses a final rinse at an elevated temperature to sanitize your dishes, killing 99.999% of bacteria. For improved drying, especially with plastics, you can select the “ProDry” or heated dry option. Choosing the right combination of cycle and options ensures you get the exact cleaning you need for each load.

Step 10: Start the Dishwasher and Unload

After selecting your cycle and options, close the door firmly and press the “Start” button. The dishwasher will begin its cycle. Once the cycle is complete, it’s best to wait a little while before unloading. This allows the dishes, particularly plastics, to cool down. When you open the door, start by unloading the bottom rack first. This prevents any water that may have collected on the top rack’s spray arm or surfaces from dripping onto the clean, dry dishes below.

5 Things You Should Avoid

  1. Overloading the Racks: Jamming too many dishes into the dishwasher prevents water from reaching everything, resulting in a poor clean.
  2. Blocking the Spray Arms: Make sure tall pots or utensils don’t obstruct the rotation of the upper or lower spray arms.
  3. Using the Wrong Detergent: Never use regular dish soap. It will create excessive suds that can overflow and damage your machine.
  4. Washing Non-Dishwasher-Safe Items: Avoid putting wood, cast iron, delicate crystal, or non-stick pans in the dishwasher, as the heat and harsh detergent can ruin them.
  5. Letting Dishes Sit for Too Long: Running the dishwasher promptly prevents food from drying on and makes cleaning easier.

Frequently Asked Questions

  • Why Are My Glasses Coming Out Cloudy?
    Cloudiness is often caused by hard water mineral deposits. To fix this, ensure your rinse aid dispenser is full. You can also try using a bit more detergent or running a cycle with a dishwasher cleaning tablet. If the film is permanent (etching), it may be from using too much detergent with soft water.
  • Is It Normal for the Inside of My Dishwasher to Be Wet After a Cycle?
    Yes, some moisture, especially on the tub walls and plastic items, is completely normal even after a heated dry cycle. KitchenAid’s ProDry system is very effective, but plastics don’t retain heat well and may not dry completely. Opening the door slightly after the cycle can help air dry the remaining moisture.
  • How Often Should I Clean My Dishwasher’s Filter?
    You should check and clean your dishwasher’s filter about once a month to ensure optimal performance. Remove the filter from the bottom of the tub, rinse it under running water to remove food particles and debris, and then place it back. A clean filter prevents clogs and ensures water circulates properly.

Conclusion

Your KitchenAid dishwasher is a high-performance appliance designed to deliver sparkling clean dishes with minimal effort.

By following these steps on how to use kitchenaid dishwasher for proper loading, using the right detergents, and selecting the appropriate cycles, you can unlock its full potential. Avoiding common mistakes will ensure your machine runs efficiently for years to come.

Now you have the knowledge to get the most out of every wash, saving time and energy while enjoying impeccably clean dishes.