Written By :

Connor

/

/

Dishwasher

Expert Author

How to Check a Dishwasher Pump

Finding a pool of dirty water at the bottom of your dishwasher after a cycle is a frustrating experience. This common problem often points to ...

Finding a pool of dirty water at the bottom of your dishwasher after a cycle is a frustrating experience. This common problem often points to an issue with the machine’s ability to drain, and the heart of that system is the dishwasher pump. The pump is responsible for forcing water out of the unit and into your home’s drain. Over time, it can become clogged with food debris, get blocked by a foreign object, or even fail mechanically. While it might sound like a job for a professional, many homeowners can perform a basic inspection themselves. This guide will provide clear, beginner-friendly instructions on how to check a dishwasher pump and identify what’s causing your drainage woes.

How to Check a Dishwasher Pump

A malfunctioning dishwasher can be inconvenient, especially when it leaves water pooling at the bottom after a cycle. Before jumping to conclusions about needing a replacement, it’s worth checking the pump as it’s often the source of the issue. By understanding the steps to inspect and troubleshoot the pump, you can save time and avoid unnecessary costs. This guide will walk you through the process, ensuring you can approach the task with confidence and ease.

Inspecting the Pump

The pump is responsible for draining out the water at the end of each dishwasher cycle. Over time, it can become clogged with debris or damaged due to wear and tear. Before running any tests or repairs on the pump, make sure to turn off power to your dishwasher at the circuit breaker to avoid any potential hazards.

Once you have safely disconnected power, follow these steps to inspect the pump:

  1. Remove the bottom rack of your dishwasher.
  2. Locate the pump, typically located at the bottom center of your dishwasher.
  3. Check for any visible signs of damage such as cracks or leaks.
  4. Use a flashlight to check for clogs in the drain and filter area.
  5. Carefully remove any debris or objects that may be blocking the pump or drain.
  6. If there are no visible issues, try running a test cycle to see if the pump is functioning properly.

If you still experience issues with your dishwasher not draining, it may be time to replace the pump. You can purchase a replacement pump from your appliance manufacturer or a local hardware store. Make sure to follow all instructions for installation and safety precautions.

Step-by-Step Guide on How to Check a Dishwasher Pump

Step 1: Disconnect Power and Water for Safety

Before you begin any work on your dishwasher, your absolute first priority is safety. You must completely disconnect the appliance from its power source to eliminate any risk of electric shock. Go to your home’s circuit breaker panel, find the switch that controls the dishwasher, and flip it to the “Off” position. For added security, use a non-contact voltage tester to confirm there is no electrical current running to the appliance. Next, turn off the water supply. The shutoff valve is typically located under the kitchen sink and should be turned clockwise until it stops.

Your Absolute First Priority is Safety

Step 2: Remove Water and the Bottom Dish Rack

To get access to the pump area, you first need to clear out the inside of the dishwasher. Start by removing the bottom dish rack and setting it aside. If there is standing water in the bottom of the tub, you will need to remove it manually. Use a small cup or bowl to bail out most of the water, and then use old towels or a sponge to soak up the rest. Getting the interior as dry as possible will make the subsequent steps much cleaner and easier to manage.

Step 3: Access the Filter and Sump

At the bottom of the dishwasher’s interior, you will find the filter assembly, which sits inside a recessed area called the sump. This is where water collects before being forced out by the pump. Most modern dishwashers have a cylindrical filter that can be removed by twisting it counterclockwise. Some models may have additional filter screens that also need to be removed. Consult your owner’s manual if you are unsure. This assembly is designed to catch large food particles and prevent them from reaching the pump, so it is often a source of clogs.

You Will Find the 
Filter Assembly

Step 4: Clean the Filter and Sump Area Thoroughly

With the filter removed, take it to the sink and wash it thoroughly with warm, soapy water. Use a soft brush to scrub away any stuck-on grease or food debris. Next, inspect the sump area at the bottom of the dishwasher where the filter was located. This area is a common collection point for debris that made it past the dishes, such as glass shards, bones, or bits of plastic. Carefully clean out this area with a cloth or paper towels, making sure to remove any foreign objects you find.

Step 5: Inspect the Drain Pump Impeller

With the sump area clean, you can now perform a visual and manual check of the drain pump’s impeller. The impeller is a small, fan-like component that spins to propel water out of the dishwasher. You should be able to see it at the bottom of the sump, sometimes under a small plastic cover that may need to be unclipped or unscrewed. Look for any debris wrapped around the impeller blades. Carefully try to spin the impeller with your finger. It should spin freely, though it might move in short bursts. If it’s stuck or very difficult to move, it’s likely jammed.

Manual Check of the 
Drain Pump's Impeller

Step 6: Disconnect the Drain Hose

If the pump impeller seems clear and moves freely, the blockage may be further down the line in the drain hose itself. This is the corrugated plastic tube that runs from the dishwasher pump to your sink’s drain or garbage disposal. Place a shallow pan and some towels under the connection point to catch any trapped water. Use a pair of pliers to loosen the clamp holding the hose in place and disconnect it from the pump. This allows you to inspect both the pump outlet and the hose for any obstructions.

Step 7: Clear Any Clogs from the Drain Hose

With the drain hose disconnected from the pump, you can now check it for blockages. First, inspect the end of the hose for any visible debris. To check the entire length, you can try blowing through it. If you meet significant resistance, there is a clog inside. You can use a straightened wire coat hanger or a plumber’s snake to carefully push the clog out. Afterward, run water from your sink faucet through the hose to ensure it is completely clear before reattaching it to the dishwasher pump.

You Can Now Check 
It for Blockages

Step 8: Test the Pump Motor with a Multimeter

If you have found no physical obstructions and the impeller spins freely, the issue could be electrical. The pump motor itself may have failed. To confirm this, you would need to test it for continuity using a multimeter. This is a more advanced step that involves pulling the dishwasher out from under the counter to access the motor’s wiring harness. Set your multimeter to the ohms setting and touch the probes to the motor’s terminals. A reading of infinity indicates a faulty motor that needs to be replaced.

Common Dishwasher Issues

Dishwashers, like any appliance, can encounter a variety of issues over their lifespan. One of the most common problems is water not draining properly. This could be due to a clogged drain hose, a faulty drain pump, or food debris obstructing the drain. Another frequent issue is dishes not coming out clean, which might be caused by an overloaded dishwasher, insufficient water temperature, or worn spray arms. Leaks are another concern and are often the result of a damaged door gasket or a loose hose connection. Additionally, if the dishwasher fails to start, the issue could stem from a blown fuse, a faulty door latch, or a problem with the control board. Regular maintenance and proper usage can help prevent many of these problems and extend the life of your dishwasher.

Most Common Problems is 
Water Not Draining Properly

Frequently Asked Questions

What Are the Signs of a Bad Dishwasher Pump?

The most common signs that your dishwasher pump is failing or clogged include:

  • Standing water in the bottom of the tub after a cycle.
  • The dishwasher is not cleaning dishes effectively (circulation pump issue).
  • Unusual noises during the wash or drain cycle, such as humming, grinding, or buzzing.
  • The dishwasher cycle stops mid-way, particularly before or during the drain portion.

Is It Worth Replacing a Dishwasher Pump?

Whether it’s worth replacing the pump depends on the age and overall condition of your dishwasher. For a relatively new or high-end model, replacing the pump is a cost-effective repair that can add many more years to its life. A new pump is significantly cheaper than a new dishwasher. However, if your appliance is old, has had other issues, or is an inexpensive model, the cost of the part and labor might be close to the price of a new unit.

How Much Does It Cost to Replace a Dishwasher Drain Pump?

The cost can vary widely. If you are doing the repair yourself, you will only need to pay for the part, which typically ranges from $50 to $150, depending on the brand and model of your dishwasher. If you hire a professional appliance repair technician, you can expect to pay an additional $100 to $250 for labor, bringing the total cost to anywhere between $150 and $400.

Can a Clogged Filter Cause the Pump to Fail?

Yes, indirectly. A severely clogged filter can restrict water flow to the pump, putting extra strain on the motor as it works harder to move water. Over time, this consistent strain can lead to overheating and premature failure of the motor. Regularly cleaning your dishwasher’s filter (at least once a month) is one of the most important preventative maintenance tasks you can do to protect the pump and ensure your dishwasher runs efficiently.

What Is the Difference Between a Drain Pump and a Circulation Pump?

A dishwasher actually has two pumps. The drain pump is responsible for removing the dirty water from the dishwasher at the end of a cycle. The circulation pump (or wash pump) is responsible for taking the water from the sump and forcefully spraying it through the spray arms to clean the dishes. If you have standing water, the drain pump is the likely culprit. If your dishes are coming out dirty but the machine drains, the circulation pump may be the issue.

Conclusion

A dishwasher that won’t drain is a common household problem, but it’s often one you can diagnose yourself with a little bit of investigation. By systematically working through the steps—from cleaning the filter and sump to inspecting the impeller and drain hose—you can often locate and resolve the blockage without needing to call for professional help. Taking the time to understand the basics of how to check a dishwasher pump not only empowers you to solve the immediate issue but also helps you better maintain your appliance for the future.