Written By :

Connor

/

/

Dishwasher

Expert Author

How to Replace a Dishwasher Filter

If your dishwasher isn’t cleaning like it used to, leaving behind gritty residue or unpleasant odors, the culprit is often a clogged filter. Many people ...

If your dishwasher isn’t cleaning like it used to, leaving behind gritty residue or unpleasant odors, the culprit is often a clogged filter. Many people don’t realize that modern dishwashers have removable filters that need regular attention. This small component plays a huge role, trapping food particles and preventing them from redepositing onto your clean dishes. Over time, if the filter becomes completely saturated with gunk or damaged, cleaning it is no longer enough. This guide provides clear, beginner-friendly instructions on how to replace a dishwasher filter, a simple maintenance task that can restore your machine’s performance and extend its life.

How to Replace a Dishwasher Filter

Replacing a dishwasher filter might sound intimidating, but it’s actually a straightforward process that anyone can tackle with a little guidance. Maintaining a clean and functional filter ensures your dishwasher operates efficiently, leaving your dishes spotless and fresh. By replacing the filter when necessary, you can prevent clogs, improve water drainage, and avoid costly repairs down the line. Taking this small step in home maintenance can save time, money, and frustration in the long run.

Why a Clean Filter Is Key to Sparkling Dishes

A clean dishwasher filter is essential for achieving spotless, sparkling dishes after every cycle. The filter’s primary job is to catch food debris, grease, and other particles during the wash, ensuring they don’t circulate back onto your dishes. However, when the filter becomes clogged or dirty, it can no longer perform effectively. This results in poor water drainage, reduced cleaning power, and even unpleasant odors inside the dishwasher. Keeping the filter clean not only ensures your dishes come out gleaming but also helps your appliance operate more efficiently, saving time, energy, and unnecessary wear and tear. Regular maintenance of the filter is a simple step that makes a big difference in overall dishwasher performance.

Step-by-Step Guide on How to Replace a Dishwasher Filter

Step 1: Purchase the Correct Replacement Filter

Before you begin, you must have the correct replacement part on hand. Dishwasher filters are not universal; each brand and model requires a specific filter assembly. The best way to find the right one is by identifying your dishwasher’s model number. This is usually printed on a sticker located on the inside edge of the door or along the side of the door frame. Once you have the model number, you can search for it online at appliance part websites or the manufacturer’s official site to order the exact filter assembly needed for your machine.

Official Site to
Order the Exact Filter

Step 2: Remove the Bottom Rack

To access the filter assembly, you need a clear workspace inside your dishwasher. Start by completely emptying the dishwasher of any dishes. Then, gently pull the bottom rack all the way out and lift it from its tracks. Set the rack aside on your kitchen floor or countertop. This gives you unobstructed access to the bottom of the dishwasher tub, where the spray arm and filter system are located. This simple step makes the entire process much easier and prevents you from having to awkwardly reach around the rack.

Step 3: Locate the Filter Assembly

Now, look at the bottom of the dishwasher’s interior. You will see the lower spray arm, which rotates to spray water during a cycle. The filter assembly is located directly beneath this spray arm. In most modern dishwashers, it consists of two main parts: a cylindrical “fine filter” or “filter cup” that often has a handle or locking mechanism, and a flat, screen-like “coarse filter” that sits underneath it. The cylindrical filter is the part you will be removing and replacing. It’s typically in the back corner or the center of the dishwasher floor.

Step 4: Unlock and Remove the Old Filter

The cylindrical fine filter is usually held in place with a simple locking mechanism. To remove it, you’ll need to turn it counter-clockwise. Look for directional arrows or lock/unlock symbols printed on the filter or the dishwasher floor. A quarter-turn or half-turn is generally all that’s required to release it from its housing. Once unlocked, you can lift the cylindrical filter straight up and out of the dishwasher. It will likely be covered in food debris and slime, so be prepared for a bit of a mess.

Step 5: Remove the Coarse Filter Screen

With the cylindrical fine filter removed, you can now access the coarse filter. This is the flat mesh screen that the cylindrical filter was sitting in. On most models, this screen is not locked in place and can be lifted out directly. Simply grab its edges and pull it upward. This component traps larger food items like popcorn kernels or pieces of bone. This is a good opportunity to inspect the area underneath where the filter sits, known as the sump, and wipe out any debris that may have collected there.

Cylindrical Fine
Filter Removed

Step 6: Clean the Sump and Surrounding Area

Before installing the new filter, take a moment to thoroughly clean the area. Use a damp cloth or a sponge to wipe down the coarse filter screen and the sump area at the bottom of the dishwasher. This removes any lingering food particles, grease, or hard water deposits that have built up over time. Ensuring this area is completely clean prevents any old debris from immediately clogging your new filter and gives your dishwasher a truly fresh start. This step is crucial for maintaining optimal drainage and cleaning performance moving forward.

Step 7: Install the New Coarse Filter

Now you will begin reassembly with your new parts. If your replacement kit came with a new coarse filter screen, place it into the opening at the bottom of the dishwasher tub. Ensure it sits flat and flush with the floor of the dishwasher. There are often tabs or indentations that help align it correctly, so make sure it settles securely into its designated spot. A properly seated coarse filter is the foundation for the entire assembly and prevents large debris from reaching the dishwasher’s pump and motor.

Step 8: Install the New Fine Filter

Take your new cylindrical fine filter and insert it into the opening in the center of the coarse filter screen. Push it down gently until it is fully seated. To secure it, you will now turn it clockwise. You should feel it lock into place with a gentle click. Refer back to the directional arrows or lock symbols you noted earlier to ensure you are turning it in the correct direction to secure it. The filter should feel firm and not wiggle once it is locked. This secure fit is essential for proper filtration.

Step 9: Reinstall the Bottom Rack and Run a Test

With your new filter assembly securely installed, you can now replace the bottom dish rack. Align the wheels with the tracks and slide it back into the dishwasher. To ensure everything is working correctly, it’s a good idea to run a short test cycle. Choose a “Rinse Only” or “Express Wash” setting. Let the dishwasher run for a few minutes to confirm that water is spraying correctly and that there are no unusual noises. This quick check verifies that the filter is seated properly and not obstructing the spray arm.

Filter is
Seated Properly

Clean the Dishwasher Filter

To maintain optimal performance and prevent clogs, it’s important to clean the dishwasher filter regularly. Begin by removing the bottom dish rack to access the filter assembly located at the base of the dishwasher. Most dishwashers have a two-part filter system, consisting of an upper cylindrical filter and a lower flat filter. Twist and lift the cylindrical filter to remove it, then gently lift out the flat filter.

Rinse both parts under warm running water to remove food particles and debris. For stubborn residue, use a soft brush or sponge with a mild detergent to scrub the filters gently. Avoid using abrasive materials that may damage the filters. Once clean, inspect the filter housing inside the dishwasher for any leftover debris and wipe it out with a damp cloth.

After cleaning, reassemble the filter by placing the flat filter back into its position and securely locking the cylindrical filter on top. Ensure everything is properly seated to prevent operational issues. Regular filter maintenance can improve cleaning efficiency and extend the lifespan of your dishwasher.

Frequently Asked Questions

How Often Should I Replace My Dishwasher Filter?

You should clean your dishwasher filter every one to three months, but you only need to replace it if it becomes damaged. A filter should be replaced if you notice:

  • Holes, tears, or cracks in the mesh screen.
  • The plastic frame is broken or warped.
  • It no longer locks securely into place.
    With proper cleaning, a filter can last for many years.

Can a Clogged Filter Stop a Dishwasher from Draining?

Yes, a severely clogged filter is one of the most common causes of a dishwasher not draining properly. When the filter is packed with food and grease, water cannot pass through to the drain pump. This results in standing water at the bottom of the tub after a cycle. Cleaning or replacing a clogged filter is often the first and most effective step in resolving drainage issues.

Dishwasher Not
Draining Properly

What Happens if You Don’t Replace a Broken Dishwasher Filter?

Using a dishwasher with a broken or torn filter can lead to serious problems. Food particles will bypass the filtration system and can clog the spray arms, preventing water from reaching your dishes. Worse, debris can get into the drain pump and motor, potentially causing expensive damage to the dishwasher’s core components. It’s a small part that protects much more critical systems.

Is It Hard to Replace a Dishwasher Filter?

No, replacing a dishwasher filter is a very easy DIY task that requires no special tools. The process typically involves a simple quarter-turn to unlock the old filter and another quarter-turn to lock the new one in place. It’s a job that most homeowners can complete in less than five minutes, making it one of the simplest and most effective maintenance tasks you can perform.

Do All Dishwashers Have a Removable Filter?

Most modern dishwashers (manufactured since roughly 2010) have a manual-clean filter system that you can remove. Older dishwashers often had self-cleaning filters with built-in food grinders, which were effective but much louder. If you are unsure, check the bottom of your dishwasher tub for the cylindrical filter assembly or consult your appliance’s user manual.

Conclusion

Taking a few minutes to check, clean, or replace your dishwasher filter is a simple task that has a massive impact on your appliance’s performance. It’s the secret to getting consistently sparkling dishes, eliminating foul odors, and preventing costly repairs down the road. By following the straightforward steps of locating the part, ordering the correct replacement, and giving the assembly a simple twist, you can easily complete this job yourself. Now that you know how to replace a dishwasher filter, you are empowered to perform this crucial piece of maintenance and keep your kitchen running smoothly.