TheKitchenix

how to check a dishwasher pump

Start by turning off power at the circuit breaker, then remove the bottom rack and look for cracks, leaks, or clogs in the pump area [1]. Clean the filter and sump, where food debris often collects [5]. Check that the impeller, the fan-like part at the bottom of the sump, spins freely and is not wrapped in debris [4]. If it is clear, disconnect the drain hose and check it for blockages, clearing any clog with a wire hanger or plumber's snake [2][3]. If nothing is physically blocked, a multimeter continuity test on the motor may show it has failed [6].

Sources

Answered from the TheKitchenix knowledge base.

Ask your own question

Or GET /ask/o/your-question-as-words or /ask/o?q=your+question.