TheKitchenix

how to drain ge profile dishwasher

Start by turning off and unplugging the dishwasher, then remove any standing water so you can reach the drain area [1][8]. Clean the dishwasher filter, rinsing it under running water before reinserting it [7]. Check the drain hose for kinks, clogs or damage and run water through it [6], and inspect it for food debris after disconnecting the power and water supply [4]. If problems continue, inspect the air gap and replace it if needed [3]. On most GE Profile models, a drain-only cycle can be started by holding Start/Reset for three seconds, closing the door, and pressing Start again; it runs about 90-120 seconds [2].

Sources

Answered from the TheKitchenix knowledge base.

Ask your own question

Or GET /ask/o/your-question-as-words or /ask/o?q=your+question.