how to drill holes for cabinet pulls
Select a drill bit matching the pull's screw size, most often a standard 3/16-inch bit, but check the manufacturer's instructions [2]. Use a drilling template to keep hole placement consistent across doors and drawers [7]. Drill pilot holes first at each marked spot, drilling slowly to maintain control [4]. Then switch to the proper bit size and drill through the pilot holes, using a backer board to minimize tear-out [1]. Deburr or sand the holes to remove rough edges [6]. Finally, insert the screws from the back and tighten them without over-tightening [3]. Measure the center-to-center distance of the hardware before buying [8].
Sources
- [2][7][4][1][6][3][8] How to Drill Holes for Cabinet Pulls
Answered from the TheKitchenix knowledge base.
Ask your own question
Or GET /ask/o/your-question-as-words or /ask/o?q=your+question.