how to light a water heater
Start by identifying your water heater's ignition type from the label on the tank [1]. Read the manufacturer's instruction sticker near the gas control valve before beginning [6]. Turn the gas supply off and wait at least five minutes for fumes to clear [8]. Open the small access panel at the bottom front to reach the pilot assembly [3]. Once the pilot burns steadily, turn the knob from "pilot" to "on" and set the thermostat, usually around 120°F (49°C) [7]. Then run a hot tap and monitor for 15–30 minutes; if the pilot keeps going out, contact a professional [4].
Sources
- [1][6][8][3][7][4] How to Light a Water Heater
Answered from the TheKitchenix knowledge base.
Ask your own question
Or GET /ask/o/your-question-as-words or /ask/o?q=your+question.