how to make flat panel cabinet doors
The passages outline a process for making flat panel cabinet doors. Start by measuring the cabinet opening at multiple points and marking the dimensions on wood [4]. Cut the panel material, such as MDF or hardwood veneer, slightly smaller than the frame to allow for expansion, then sand it smooth [5]. Cut a groove about 1/4 inch deep along the inner edges of the frame with a router and slide the panel in, optionally gluing it [6]. Apply a stain or paint and let it dry fully [7]. Install the doors by marking and pre-drilling hinge positions, then screwing the hinges so the doors hang straight and level [1]. Finish with any hardware adjustments and an optional protective topcoat [2].
Sources
- [4][5][6][7][1][2] How to Make Flat Panel Cabinet Doors
Answered from the TheKitchenix knowledge base.
Ask your own question
Or GET /ask/o/your-question-as-words or /ask/o?q=your+question.