how to test dishwasher motor
To test a dishwasher motor, first disconnect its wiring harness by depressing the locking tab and pulling it straight off, avoiding tugging the wires [1]. Lay the dishwasher on its back and locate the main circulation motor near the center of the base, inspecting for leaks, burn marks, or cracked wiring [6]. Set a multimeter to continuity and touch the probes to pairs of motor terminals: a functioning motor shows low resistance, while an "OL" reading indicates a break in the windings [2]. To check for a short to ground, place one probe on clean unpainted metal of the housing and touch the other to each terminal; any beep or continuity reading means the motor is shorted [5]. Finally, try spinning the impeller by hand; it should turn with some resistance, and if it won't move, it may be jammed by debris or have failed bearings [8].
Sources
- [1][6][2][5][8] How to Test Dishwasher Motor
Answered from the TheKitchenix knowledge base.
Ask your own question
Or GET /ask/o/your-question-as-words or /ask/o?q=your+question.