Written By :

Connor

/

/

Dishwasher

Expert Author

How to Clean a KitchenAid Dishwasher Filter

Your KitchenAid dishwasher is a powerhouse appliance, but to keep it running at its best, it needs a little routine maintenance. If you’ve noticed your ...

Your KitchenAid dishwasher is a powerhouse appliance, but to keep it running at its best, it needs a little routine maintenance. If you’ve noticed your dishes are coming out with a gritty film, or if unpleasant odors are lingering after a cycle, a dirty filter is the most likely culprit. Food particles and grease naturally build up over time, clogging the filter and reducing cleaning efficiency. Thankfully, this is an incredibly simple fix that requires no special tools. This guide will provide clear, beginner-friendly instructions on how to clean a kitchenaid dishwasher filter, a quick task that will make a huge difference in your machine’s performance.

How to Clean a KitchenAid Dishwasher Filter

A properly maintained dishwasher is essential for keeping your dishes sparkling clean and your kitchen running smoothly. Over time, even the most efficient appliances require a little care to stay at peak performance. Fortunately, a bit of routine maintenance can go a long way in ensuring your dishwasher continues to work efficiently and hygienically. One key task is cleaning the filter, which is often overlooked but crucial for preventing buildup and maintaining proper water flow.

Cleaning the Filter

The filter in a dishwasher is responsible for trapping food particles and preventing them from clogging up the system. Over time, these trapped particles can accumulate and cause issues such as reduced water flow, poor cleaning performance, and even unpleasant odors. To keep your dishwasher running smoothly, it’s important to clean the filter regularly.

Start by locating the filter, usually found at the bottom of the dishwasher beneath the lower spray arm. Remove the lower rack to gain better access, and then carefully take out the filter by twisting it counterclockwise or following the specific instructions in your dishwasher’s manual. Rinse the filter under warm running water to remove any trapped debris. For more stubborn buildup, use a soft brush or sponge with a mild detergent to gently scrub the filter clean. Once it’s spotless, reassemble and securely replace the filter in its original position. Regular cleaning, ideally once a month, will ensure optimal dishwasher performance and extend its lifespan.

Step-by-Step Guide on How to Clean a KitchenAid Dishwasher Filter

Step 1: Locate and Remove the Lower Dish Rack

Before you can access the filter assembly, you need to clear the way. Start by opening the dishwasher door completely and sliding the bottom rack all the way out. This gives you an unobstructed view and ample space to work inside the dishwasher tub. The filter system is located on the floor of the dishwasher, directly beneath the lower spray arm. Removing the rack is a simple but essential first step that makes the entire process much easier and allows you to access the components without any trouble.

Step 2: Locate the Filter Assembly

With the bottom rack removed, look at the floor of the dishwasher tub. You will see the filter assembly, which consists of two main parts: the circular Upper Filter Assembly and the flat Lower Filter that sits beneath it. The Upper Filter typically has a cylindrical shape with a handle or knob on top, and it sits in the center of the dishwasher floor, often integrated with the lower spray arm base. Recognizing these two components is key to a successful cleaning, as both parts need to be removed and washed to fully clear any blockages.

Look at the Floor
Of the Dishwasher Tub

Step 3: Remove the Upper Filter Assembly

The Upper Filter Assembly is designed for easy removal. To take it out, grasp the top of the cylinder and turn it about a quarter-turn counter-clockwise. You should feel it unlock from its base. Once unlocked, you can lift the entire upper filter straight up and out of the dishwasher. This component is a fine mesh screen designed to trap smaller food particles and prevent them from being redeposited onto your dishes. You will likely see a significant amount of food debris and greasy buildup trapped in this part of the filter.

Step 4: Remove the Lower Filter

Once the upper filter is out of the way, you can remove the Lower Filter. This is a flat, coarse mesh screen that sits directly underneath the upper filter. It is designed to trap larger items, like bones or pieces of glass, and protect the dishwasher’s pump from damage. The Lower Filter is not locked in place; you can simply lift it straight up and out of the dishwasher tub. Be gentle as you remove it. This filter often collects larger, more obvious debris that has been rinsed off plates during the wash cycle.

Coarse Mesh Screen
That Sits Directly Underneath

Step 5: Wash the Filters

Now it’s time to clean the parts you’ve removed. Take both the Upper and Lower filters to your kitchen sink. The best way to clean them is under warm, running water. Use a soft brush, like an old toothbrush or a bottle brush, to gently scrub away all the trapped food particles, grease, and grime. Avoid using wire brushes or abrasive scouring pads, as these can damage the fine mesh of the filters. For stubborn, greasy buildup, you can use a little bit of mild dish soap to help break it down.

Step 6: Rinse the Filters Thoroughly

After you have scrubbed both filter components clean, it is crucial to rinse them thoroughly under warm water. Make sure that all traces of dish soap are completely washed away. Any soap residue left on the filters can cause excessive sudsing during the next wash cycle, which can lead to leaks and poor cleaning performance. A final, thorough rinse ensures that the filters are completely clean and ready to be reinstalled, allowing water to flow through them freely as intended for optimal dishwasher function.

Allowing Water to
Flow Through Them Freely

Step 7: Clean the Filter Housing Area

While the filters are out, take a moment to inspect and clean the area where they sit inside the dishwasher. This is often called the filter housing or sump. Use a damp cloth or a paper towel to wipe away any food debris or grime that may have collected in this area. This simple step ensures you are re-installing your clean filters into a clean environment, preventing any leftover particles from immediately clogging them again. A clean housing helps maintain the overall hygiene and efficiency of your dishwasher’s filtration system.

Step 8: Reinstall the Filters

Reinstalling the filters is simply the reverse of removal. First, place the flat Lower Filter back into its position on the floor of the dishwasher tub, ensuring it sits flush and is properly aligned. Next, insert the cylindrical Upper Filter Assembly back into the opening. Turn it clockwise about a quarter-turn until you feel it lock firmly into place. You should not be able to pull it straight up. An improperly seated filter can lead to poor cleaning performance, so double-check that it is secure. Finally, slide the bottom rack back in, and you’re done.

Frequently Asked Questions

How Often Should I Clean My KitchenAid Dishwasher Filter?

For best performance, it is recommended to check and clean your dishwasher filter at least once a month. However, your frequency may vary based on your usage. If you are diligent about scraping plates before loading, you might be able to go longer. If you notice any of the following signs, it’s time for a cleaning:

  • Visible food particles on dishes
  • Gritty residue on glasses
  • Unpleasant odors
  • Water not draining properly

What Are the Signs of a Clogged Dishwasher Filter?

A clogged filter directly impacts cleaning performance. The most common sign is that your dishes are not getting clean, often emerging with a sandy or gritty film on them. You might also notice a decrease in water pressure from the spray arms or see standing water at the bottom of the tub after a cycle. A foul, musty odor coming from the dishwasher is another tell-tale sign that old food particles are trapped and decaying in the filter.

Can I Run My KitchenAid Dishwasher Without the Filter?

No, you should never run your dishwasher without the filters properly installed. The filter system is designed to protect the dishwasher’s pump and spray arms from being clogged or damaged by large food debris. Running the appliance without the filters can lead to very expensive repairs and may void your warranty. The filters are essential for the machine’s long-term health and operation.

Is It Normal for My KitchenAid Dishwasher Filter to Be Slimy?

Yes, it is quite normal for the filter to feel slimy. This sliminess is typically a combination of grease, oils from food, and detergent residue that has built up over time. It’s a clear indicator that the filter is doing its job by trapping this gunk. Regular cleaning with warm water and a soft brush will easily remove this slime and prevent it from developing into foul odors.

What if I Can’t Twist the Filter to Remove It?

If the upper filter feels stuck, it’s likely due to a buildup of debris or hard water deposits in the locking mechanism. Do not use excessive force, as this could break the plastic components. Try pouring a cup of hot water (not boiling) around the base of the filter to help loosen any grease. You can also try gently wiggling it back and forth while applying slight counter-clockwise pressure to break it free.

Conclusion

Taking just a few minutes each month to clean your dishwasher’s filter is one of the most effective things you can do to ensure sparkling dishes and a fresh-smelling machine. This simple task prevents food buildup, improves water circulation, and protects your appliance’s vital components from damage. The process is quick, easy, and requires no special skills or tools. Now that you have a clear, step-by-step guide for how to clean a kitchenaid dishwasher filter, you can confidently add this simple task to your routine and enjoy the rewards of a perfectly performing dishwasher.