How to Connect Two Faucet Supply Lines

If you’re remodeling a bathroom or kitchen, one of the most intimidating tasks can be connecting two faucet supply lines together. Need to connect two faucet supply lines? It’s not as complicated of a task as you might think. In fact, connecting two faucet supply lines is a fairly straightforward process that almost anyone with some basic plumbing knowledge can handle.

How to Connect Two Faucet Supply Lines

Fortunately, it’s not as hard as it seems; with the right tools and some guidance, you’ll be able to connect your water supply lines in no time! This guide will provide all the information needed so that homeowners can confidently replace their old faucets without having to rely on professional plumbing help. Read on for tips on how to connect two faucet supply lines correctly and quickly!

Things to Remember While Connecting Two Faucet Supply Lines

When connecting two faucet supply lines, it’s important to take some precautions in order to ensure that the connection is secure and watertight. Here are a few things to keep in mind:

  • Make sure you have the right size supply lines for your project. Measure the distance between the two faucets and buy the appropriate size supply lines; if they are too small, the connection won’t be secure. Too big, and you may over-tighten it.
  • Make sure to use the plumber’s tape on the threads of all fittings before you start screwing them in place. This will help ensure a tight seal and prevent water from leaking out.
  • Use pipe wrenches or adjustable wrenches when tightening connections. Pipe wrenches provide more grip than standard adjustable wrenches and can help you avoid over-tightening and damaging the pipes.
  • When connecting two faucet supply lines together, always use a union fitting—never just join them side by side with clamps or other fittings.
  • When all connections are secure and have been tested for leaks, install shutoff valves on both supply lines to make closing off the water supply quickly easier in case of emergency.

Following these tips will help you ensure that your faucet supply line connection is secure and watertight.

 Adjustable Wrenches When Tightening

Required Items

  • Faucet Supply Lines
  • Plumber’s Tape
  • Pipe Wrenches or Adjustable Wrenches
  • Union Fitting
  • Shutoff Valves
  • Clamps (optional)

Tools Needed

  • Tape Measure
  • Wrenches
  • Pliers (optional)

Before beginning, make sure you have the required items and tools needed for connecting two faucet supply lines. With these items in hand, you can now proceed with the installation!

10 Ways How to Connect Two Faucet Supply Lines

1. Measurement

Measure the distance between the two faucets and purchase the correct size of the supply line for your project. Distancing should be taken into account when deciding what size of the supply line is needed. Also, make sure to check the diameter of your faucet outlets before buying supply lines.

2. Cleaning & Washing

Clean the ends of both supply lines and remove any dirt or debris with a damp cloth. Rinse them off with water and let them air dry. Cleaning and washing the lines is important in order to ensure a secure connection.

3. Application of Plumber’s Tape

Wrap the plumber’s tape around the threads of all fittings before screwing them into place. This will provide a tight seal and prevent water from leaking out. Make sure to apply an even layer with no gaps or breaks.

4. Tightening Connections

Use pipe wrenches or adjustable wrenches when tightening the connections between the two supply lines, making sure that they are properly aligned and secure. Pipe wrenches provide more grip than standard adjustable wrenches and can help you avoid over-tightening and damaging pipes.

5. Use of a Union Fitting

When connecting two faucet supply lines together, always use a union fitting—never just join them side by side with clamps or other fittings. A union fitting is designed to securely fasten two piping sections and provide an effective water-tight seal. Using clamps or fittings could result in a water leak.

A Union Fitting is Designed

6. Installing Shutoff Valves

Once all connections are secure and have been tested for leaks, install shutoff valves on both supply lines. This will make it easier to close off the water supply quickly in case of an emergency. Valves should be installed on the cold side of the water supply.

7. Testing Connections

Once all connections are secure, it’s important to test them for leaks. Turn on both faucets and check underneath each one for any visible signs of water leaking out at the connection or valve points. If you see any leaks, shut off the water and retighten the connections.

8. Final Measurements

Take a final measurement of the distance between the two faucets to make sure that you have acquired the correct size of supply line for your project. This step is important in order to avoid having too short or too long a connection.

9. Sealing & Securing Connections

Secure all connections with a clamp or other secure fitting. Apply sealant around the connection points to ensure that they remain watertight. Sealing and securing all connections is very important for the overall stability of your connection.

10. Final Checks & Tests

Perform a final check to make sure that all the supply lines are secure and no leaks or other issues remain. When you have finished checking everything, turn on both faucets and check again for any signs of water leaking out. If everything is satisfactory, your connection is now complete!

Turn on Both Faucets and Check Again

By following these steps, you can easily connect two faucet supply lines and have them securely connected in no time. With the right preparation and a few tools, you can get the job done quickly and properly.

Always remember to be cautious when dealing with pipes and connections and to always check for leaks and other potential problems before you turn on the water supply. Taking these precautions will help ensure that your installation is secure and your connection is safe.

8 Safety Precautions to Follow

When connecting two faucet supply lines, it is important to follow a few safety precautions. Here are eight tips to consider before getting started:

1. Shut off the main water supply line before making any connections. This will prevent any chance of water leaking out while you work. Also, be sure to wait a few minutes after turning off the main water supply before starting to work.

2. Wear safety goggles and gloves when working with any kind of plumbing. The water and fittings may contain particles that can cause severe eye injuries or skin irritation if not handled carefully.

3. Make sure you have all the necessary supplies on hand, such as pipe fittings, plumbing tape, an adjustable wrench, and a hacksaw. All supplies should be in good condition and fit properly.

4. Read the instructions carefully before connecting any parts to ensure a secure connection. Instructions will provide information on the order in which steps should be taken and any safety precautions to follow.

5. Test your connections carefully after connecting each pipe, nut, or fitting. Check for leaks or weak connections that may need to be tightened further. While testing, ensure the water pressure is not too high, as this can cause damage to the pipes and fittings.

6. If there are any old supplies being replaced, dispose of them responsibly according to local laws and regulations. Also, check for any corrosion or damage that may have occurred to the old supplies.

7. If you need help understanding how to connect two faucet supply lines, do not hesitate to contact a professional plumber. They will be able to provide advice and assistance to ensure everything is connected correctly and safely.

8. Finally, never forget to turn the main water supply back on when finished. This will help ensure your new connections are working properly, and you can start using them right away. 

Also, it will provide you with peace of mind knowing that all the work was done correctly.

By following these eight safety tips, you can make sure that connecting two faucet supply lines is a safe and successful process. With the proper tools and knowledge, this project can be completed quickly and without any major complications.

Shut Off the Main Water Supply

Conclusion

Learning the ways is a great do-it-yourself project, and one that can save you a lot of money. With the right tools and materials, you can get your lines connected in no time at all.

Start by turning off the water supply valves before disconnecting each existing line and measuring for the new connection pieces. Make sure to use the plumber’s tape to secure any connections before reattaching them to each faucet.

Once everything is secured, you can gently turn on the water supply and check for any leaks. If all looks good, be sure to pour bleach down both faucet drain lines to kill bacteria that may have built up over time—this will ensure clean, safe drinking water for years to come!

Now you know the basics of how to connect two faucet supply lines; with this information in hand, there should be no stopping you from completing this DIY project with confidence.

You Can Check It Out to Install Kitchen Faucet Moen

Leave a Comment