Installing a PUR water filter on your faucet can be a great way to ensure clear, clean drinking water. No one likes dealing with cloudy or slimy tap water, so having the convenience of filtered water straight from the tap can make life easier – and save you many trips to the store for bottled water! But if you have a pull-out faucet, there may be some confusion as to how you should go about installing it properly.
![How to Install Pur Water Filter on Pull Out Faucet](https://thekitchenix.com/wp-content/uploads/2023/06/How-to-Install-Pur-Water-Filter-on-Pull-Out-Faucet-1024x488.jpg)
In this blog post today we’ll cover all the steps necessary for how to install pur water filter on pull out faucet. Read on to learn more!
Tools and Materials You Will Need to Install Our Water Filter on Pull-Out Faucet
- Pur Water Filter
- Adjustable Wrench
- Teflon Tape
- A Bucket or Bowl
- Screwdrivers
- Penetrating Oil (optional)
Step by Step Guidelines on How to Install Pur Water Filter on Pull Out Faucet
Step 1: Remove the Old Faucet Aerator and Diverter
The first step is to remove any existing parts attached to your pull-out faucets, such as the aerator or diverter. You may need to use an adjustable wrench or other tools to do this. Once these parts are unthreaded, you can place them into a bucket or bowl for safekeeping. This will make it easier to reattach them later.
![Need to Use an Adjustable Wrench](https://thekitchenix.com/wp-content/uploads/2023/06/Need-to-Use-an-Adjustable-Wrench.jpg)
Step 2: Prepare the Threaded Tube for Installation
Next, you’ll need to prepare the threaded tube on your water filter for installation. If needed, apply Teflon tape evenly around the threads of the tube in order to create a tight seal.
Ensure not to use too much tape, as this can make the connection overly familiar and difficult to turn. Preparing the tube in this way will also help ensure that you don’t have any leaks when the filter is attached.
Step 3: Attach the Water Filter to Your Pull Out Faucet
Once your threaded tube has been prepared, you can attach it to your pull-out faucet by lining up the threads and turning the tube clockwise until it is securely in place. You may need an adjustable wrench to provide some extra leverage in order to tighten it fully.
If you have difficulty tightening the threaded tube, try spraying a bit of penetrating oil around the threads. This should make them easier to turn and help ensure that your connection will be as tight as possible.
![Tightening the Threaded Tube](https://thekitchenix.com/wp-content/uploads/2023/06/Tightening-the-Threaded-Tube.jpg)
Step 4: Reattach the Old Faucet Parts
After your water filter has been securely attached, you can reattach any of the old parts that you had removed. This includes the aerator or diverter, as well as any other components. If they fit tight when you try to screw them back on, use an adjustable wrench to help you tighten them.
Once everything is in place, your water filter installation is complete!
Congratulations on successfully installing your pur water filter on the pull-out faucet! Now that you know how to do this yourself, you can enjoy the convenience of filtered water straight from your tap any time you need it.
Additional Tips and Tricks to Install Pur Water Filter on Pull-Out Faucet
- Make sure the faucet does not have an integrated filter before installing the Pur Water Filter, as this can cause a backflow of water and damage to your faucet.
- Check if your Pur Water Filter comes with adapters for different sizes or types of pull-out faucets so that you can easily install them.
- Carefully reassemble the faucet after installation, and give it a test run before reinstalling the Sprayer head. Make sure to tighten all connections securely to avoid leaks.
- If your Pur Water Filter has an indicator light, be sure to check it regularly to make sure that you’re getting adequate filtration.
- Change the filter cartridge per the manufacturer’s instructions every 3-6 months for optimal performance.
- When it’s time to change the filter, use the appropriate cartridge for your Pur Water Filter.
- Avoid over-tightening the connections when installing or changing the filter cartridges as this could cause damage to your faucet and water filter.
- Be sure to follow all signposts regarding safety when installing the Pur Water Filter.
Following these tips and tricks will help you to quickly and successfully install your Pur Water Filter on pull-out faucets. This way, you can rest assured that you have clean drinking water at your fingertips!
![Make Sure to Tighten All Connections](https://thekitchenix.com/wp-content/uploads/2023/06/Make-Sure-to-Tighten-All-Connections.jpg)
Things You Should Consider to Install Pur Water Filter on Pull-Out Faucet
- Is your faucet compatible with the water filter? Before purchasing a filter, make sure that it is designed to fit on a pull-out faucet and is compatible with your model of faucet.
- Make sure you have all the necessary supplies for installation. You will need some type of wrench or adjustable pliers, a bucket or tray to catch any water that may leak, and some Teflon tape.
- Remove the aerator from the end of the faucet’s wand. This will allow for more room to work and easier access to the base of the faucet.
- Unscrew the tip of the faucet using a wrench and separate it from the base. Take care not to damage any parts as you do this.
- Wrap some Teflon tape around the threads of the filter and then screw it onto the end of the faucet’s base. Make sure that it is securely in place.
- Reattach the tip of the faucet to the base and tighten it with a wrench. Check for any leaks around the connection point and if there are any, add more Teflon tape until it is sealed.
- Once everything is in place, turn on the water supply to ensure that there are no further leaks or issues with the installation.
- Install the water filter cartridge into the housing and follow any additional instructions provided by the manufacturer. You should now be able to enjoy cleaner, healthier drinking water with your Pur Water Filter on Pull Out Faucet!
These are some of the important things to consider when installing a Pur Water Filter on Pull Out Faucet. It is highly recommended that you take the necessary precautions and follow manufacturer instructions for a successful installation. Doing so will ensure that your Pur filter works properly and provides clean, safe drinking water.
![Check for Any Leaks](https://thekitchenix.com/wp-content/uploads/2023/06/Check-for-Any-Leaks-1.jpg)
Frequently Asked Questions
Will This Filter Work With My Pull-out Faucet?
Yes, the PUR water filter is designed to fit on most standard and pull-out faucets. It allows for easy connection and requires no tools for installation.
How Do I Install the Filter?
Installing the filter is simple. First, make sure the diverter switch is in its down position before installing it. Then, tighten the black plastic nut to secure it onto your faucet and turn on both hot and cold water valves. Let the water run for several minutes to flush out any debris or air in the lines. Finally, twist the PUR filter cup onto the black plastic nut until it is finger-tight and you are ready to use your filtered water.
What Maintenance Is Required?
The only maintenance required for the PUR water filter is replacing the old one with a fresh filter every two months. This will ensure that your drinking water remains clean and pure.
What Kind of Replacement Filters Do I Need?
The type of replacement filter you need for the PUR filter depends on what contaminants are in your local water supply. The most common types include activated carbon, sediment, and reverse osmosis filters. Be sure to check with your local water supplier for recommendations.
Do I Need To Have A Professional Install It?
No, the PUR water filter is designed for do-it-yourself installation. However, if you are having trouble with the installation process or have any questions along the way, it may be helpful to contact a professional plumber.
Are There Any Special Tips For Installing The Filter?
Yes, when installing the filter make sure that the black plastic nut is tightened securely. This will ensure a watertight seal and prevent any leaks. Also, be sure to take your time and follow all of the instructions carefully so that you get the best performance out of your filter. Finally, make sure to flush out the lines before use and replace the filter regularly for optimal performance.
Conclusion
Now that you know how to install PUR water filter on pull out faucet, you are ready to experience the clean taste of filtered water! Installing the filter was easy and the time it takes is minimal. Not only will your tastebuds be pleased with the difference in flavor, but you will also feel a sense of accomplishment by completing the installation all on your own. This now puts you one step closer to living a more sustainable life.
However, if you ever run into an issue along the way or have any questions about this process, be sure to check out our comprehensive customer support page for help. After all, that’s why we’re here – to make sure everyone has access to safe drinking water!