If your Samsung refrigerator comes equipped with an ice maker, you may wonder how to turn it on. Here’s a quick guide to get you started. First, locate the ice maker power switch, usually near the bottom of the fridge. Then, flip the switch to the “on” position and wait for the ice maker to start producing ice.
There are a few things you can check before calling for service. In most cases, you’ll be able to get the ice maker up and running again with just a few simple steps. Keep reading to learn how to turn on Samsung ice maker.
6 Common Reasons Your Samsung Ice Maker is Not Working
1. Ice Maker Switch is turned off:
The first and most common issue causing a Samsung ice maker not to work is that the switch for the ice maker has been turned off. To fix this, simply locate the power switch on your refrigerator, usually near the bottom, and ensure it’s in the “on” position. If the switch is off, turn it back to the “on” position and wait for the ice maker to start producing ice.
2. Water Supply Valves are Not Open:
The next common issue causing a Samsung ice maker not to work is that the water supply valves may be closed. Locate the shut-off valve behind your refrigerator and ensure it is open. If not, carefully open the valve and wait for the ice maker to start producing ice.
3. Ice Maker Basket is Full:
If your Samsung ice maker isn’t working, you may want to check if the basket inside the freezer is full. If this is the case, empty the basket and wait for the ice maker to start producing ice.
If the ice maker is still not producing ice, you may need to check for other issues. Make sure that the ice maker switch, water supply valves, and ice maker basket have been checked before proceeding.
4. Water Filter is Clogged:
It’s also possible that your Samsung ice maker may not be working because the water filter is clogged or needs to be replaced. To check this, locate the water filter inside your refrigerator and inspect it for any visible blockages. If the filter is clogged, replace it with a new one and wait for the ice maker to start producing ice.
5. Water Pressure is Low:
If your Samsung ice maker still isn’t working after checking all of the above causes, you may need to check the water pressure. For optimal performance, the water supply line to your ice maker should have a minimum pressure of 20 psi. If the water pressure is too low, then it may prevent the valve from opening and result in no ice production.
To check the water pressure, you will need an inexpensive pressure gauge that can be purchased at any hardware store. Connect it to the inlet valve and make sure the pressure is within the recommended range. If the water pressure is lower than 20psi, you may need to contact a professional plumber for assistance.
6. Thermostat Setting:
Another common issue causing a Samsung ice maker not to work is the thermostat setting. If the temperature inside your freezer is too high or too low, it could affect the performance of your ice maker.
First, check the temperature settings inside your freezer and ensure they are set correctly. The ideal temperature range for a Samsung ice maker is between 0°F and 5°F. If the thermostat setting is incorrect, adjust it to the correct range and wait for the ice maker to start producing ice.
Step-by-Step Guide: How to Turn on Samsung Ice Maker
Step 1: Locate the Ice Maker
The first step is to locate the ice maker. This is typically located in the freezer compartment of your refrigerator. Once you have located the ice maker, you must identify the power button. If the refrigerator does not have a power button, an on/off switch may be located near the ice maker.
Step 2: Power up the Ice Maker
Once you have identified the power button or switch, press it to turn on the ice maker. The ice maker should now begin to produce ice. If the ice maker doesn’t start working, check the power connection. It may be that the plug has come loose from its socket or the circuit breaker needs to be reset. If none of these steps fix the problem, contact a qualified technician.
Step 3: Monitor Progress
Monitor the ice maker’s progress by checking it every few hours. Ice should start forming within 24-48 hours. If you don’t notice any ice after 48 hours, check the water lines beneath the refrigerator and make sure they are properly connected.
If the connection is good, but no ice is still forming, you may need to reset your Samsung icemaker again. If everything looks good, but the ice maker still isn’t functioning properly, you may need to call a professional for service.
Step 4: Fill the Water Reservoir
The next step is to fill the water reservoir. The water reservoir is typically located behind the ice maker. Once you have located it, you will need to use a pitcher or other container to fill it with water. If the reservoir is full, the ice maker will start producing ice. Make sure to check the reservoir periodically and refill it as needed.
Step 5: Check for Ice Production
Once the water reservoir is filled, it’s time to check for ice production. First, make sure that the on/off switch is in the “on” position. Then, wait 15 minutes and check the ice bin for any newly-formed ice cubes. If there aren’t any cubes, it may be necessary to adjust the water supply valve pressure or ensure that the tube leading from the valve to the reservoir isn’t twisted or kinked.
Step 6: Place Ice Trays in Freezer
After filling the water reservoir, you will need to place the ice trays in the freezer compartment of your refrigerator. Ensure they are placed in a level position to collect the ice properly. If the trays are not placed in the correct position, your ice maker will not work properly. If the trays are not placed in the freezer at all, the ice will not freeze.
Step 7: Wait for Ice Cubes
Once you have placed the ice trays in the freezer, you will need to wait for them to fill with ice cubes. This typically takes between 2-4 hours. If the ice cubes are not forming within this time frame, the ice maker may malfunction.
If this occurs, you can troubleshoot any potential problems by ensuring that all connections are properly made and checking the water supply line for any blockages or kinks. Additionally, you could check to ensure that the freezer’s temperature is low enough – it should be set to 0°F (-18°C). Once the ice cubes have formed, you can remove them from the trays and enjoy a cold drink!
Step 8: Remove Ice Cubes from Trays
Once the ice cubes have formed, you will need to remove them from the trays and place them in a storage container. You can then use them as needed. If your ice machine does not have an automatic-eject function, you can manually remove the cubes by pressing the release lever on each tray.
Be sure to store your ice in a cool and dry area so that it lasts as long as possible. When your ice cubes are all removed from the trays, turn off the power switch or unplug the ice maker. This will prevent any further cubes from forming and conserve electricity.
Step 9: Turn on Ice Maker
After placing your ice maker’s water supply line and other necessary components, the next step is turning on your ice maker. Depending on your model of Samsung refrigerator, this process may vary slightly.
For example, if you have a French door-style refrigerator, locate the “Ice Maker and Water Dispenser” toggle switch located in the upper right corner of the refrigerator, and move it to the “On” position.
Step 10: Clean the Ice Maker Regularly
It is important to clean your ice maker regularly to prevent the build-up of bacteria and mold. You can clean it by using a mild soap and water solution. If your ice maker has a removable tray, be sure to remove it and scrub it clean with the same soapy water solution.
Once you have finished cleaning, rinse off your ice maker with plain water and dry it thoroughly. Make sure to also check the gasket for any signs of wear or tear and replace if necessary. This will help ensure that your ice maker runs smoothly and efficiently.
Additional Tips and Advice to Maintain Samsung Ice Maker
- To ensure your ice maker runs efficiently and produces quality ice, cleaning the appliance regularly is important. To do this, turn off the Samsung Ice Maker and unplug it from the power source. Next, use a soft cloth or sponge to wipe away any dirt or debris on and around the ice maker.
- For tougher stains, you can use a mixture of water and baking soda. Ensure to avoid using harsh chemicals as this may damage the appliance.
- Additionally, you should regularly check the supply line at the back of your Samsung Ice Maker to ensure it is not cracked or clogged with dirt or debris. If necessary, replace the supply line as needed.
- To keep your Samsung Ice Maker in optimum condition, it is important to change the water filter regularly. Depending on the model of your ice maker, you can buy and install a new filter from any appliance store or online retailer.
- If you find that the quality of the ice produced by your Samsung Ice Maker is unsatisfactory or the appliance is not working properly, contact a professional technician for help. They will be able to identify and fix any potential issue with your ice maker quickly and efficiently.
Following these simple tips ensures that your Samsung Ice Maker runs smoothly and produces quality ice every time. So be sure to clean your Samsung Ice Maker regularly, check the supply line and water filter, and contact a professional if necessary.
Final Words
Most newer Samsung ice makers have turned on automatically. If you have an older model, there should be a switch near the ice maker that you can flip to the “on” position. If your ice maker still isn’t working, check your Owner’s Manual for troubleshooting tips specific to your model or contact Samsung customer service.
We hope this guide has helped give you some advice on how to turn on samsung ice maker. Have you had any success turning on your Samsung ice maker? Let us know in the comments below!
You Can Check It Out to Prevent Mold in Kitchen Cabinets
